|
| |
GlowControl
from rainbow-tronic
GlowControl
is a unique glow plug control / heating, based on latest microprocessor
technology. GlowControl will help you to save money, to increase the
operating safety of your model considerably and to offer each pilot an
unprecedented comfort.
From a free-programmable throttle position and via an additional electr. battery
GlowControl heats proportional the glow plug up to idling position where
the maximum heating is reached and therefore glowing is strongest. That’s
operates a process, adapted to the ignition temperature and therefore, an ideal
flow of burning for the overall motor torque, especially in the low range speed
segment. Additionally, the transition from low to high speed is influenced
positively and all this with an extreme small consumption of energy and a
minimum of weight.
GlowControl by rainbow-tronic is signalizing by the following
attributes:
Freely programmable and storage of the glow range
For this reason programming of the range respectively necessary animation of the
throttle control after each power up of the receiver is dropped. With
GlowControl the glow range is stored per keypress once. No Poti adjustments
or the like are necessary!
The best: At all time the glow range can be adapted and modified individually
because each motor is different.
An external glow battery is not necessary
Due to GlowControl you start your motor directly without an
external glow battery.
Initiation of the starting mode via animation of the throttle control or
pushbutton (if necessary)
You do not start your motor in idling position where the glow plug
control providing the biggest power? No problem. GlowControl can be
switched over to continuing glow at any time even if your model is up in the
air!!
In fact, GlowControl makes alive during the flight cylinder of the flat
twin or in-line-motor that „fallen asleep“!!
Status-LED informs about the actual operating condition
You will get to know the actual GlowControl status. An
additional start-up pilot lamp is not necessary.
Safety First
GlowControl disposes of enourmous FailSafe – functions as for instance:
POSM ® No glowing after power up of the receiver indifferent to the throttle
control position (absolute saftey aspect!). Protects fingers and keep emptily
storage batteries.
If no valid signals come from the receiver GlowControl shut-off the
glowing.
Transmitter turned-off , receiver still powered? GlowControl shut-off the
glowing and informs about the status-LED.
Only 1 battery cell per glow plug
GlowControl only needs 1 battery cell per glow plug (1 and 2 cylinder
version). That’s save weight opposite to other products.
Cofiguration of glow plug current
Via jumper the glow current can be easily configured according to your
individual belongings.
Equal to no heat development of the power amplifier by LowOhm technique
The small thevenin resistance of the power amplifier by a few Milliohm
cares for hardly any heat development. Special arrangements at installation of
GlowControl (as cooling, position) are not necessary.
Multiple glow plugs can be connected
The standard version of GlowControl can supply up to 2 glow plugs
and no appreciable heat development occurs. GlowControl flat-4 is
available for 4-Cylinder-Motors, GlowControl 5* and GlowControl 7*
for radial motors!!!!
Compact Design (35 x 55 mm)
For the enourmous scope of services GlowControl is amazing
small-sized and as no special installation steps have to be considered
GlowControl is suitable for nearly each model.
Receiver supply voltage
GlowControl cooperates with 4 or 5 cell receiver batteries. The supply
voltage is detected automatically, indifferent if a full 4 cell or an empty 5
cell is attached. The supply voltage range may be situated between 3,5V and 8V.
Both NiCd and NiMH cells can be used.
Receiver battery control
GlowControl also controls the voltage of the receiver battery.On lower
deviation of 4,45V this will be stored and after landing of the model indicated
via the status-LED.
Guarantee
rainbow-tronic grant a warranty period of 36 months instead of the legal
24 months! Furthermore, you have the option to send in and to update your module
free of charge provided that available.For this purpose you will be informed by
email.
Operating manual
Upon receipt of GlowControl also a multilateral illustrated
operating and configuration manual is included.
|
